VERDICT 7.62 Ti

Verdict Is Authority, Rendered Quiet.

A 7.62 / .308 precision silencer built entirely from titanium — light enough to keep your rifle's balance where you like it and carry all day into the hills. Its integral reduced-backpressure endcap vents gas forward, keeping toxic blowback off the line.

Inside, a helical baffle core and internal acoustic texturing render authority quiet. It's HUB-compatible and ships with a 5/8×24 direct-thread mount, moving from host to host without ceremony. Authority. Finality. Quietly.

Acoustic Dimpling

Acoustic Golfball Dimpling™

Internal dimpling deepens the tone and increases internal volume — matching what an undimpled silencer would need ~1.5″ of extra length to achieve.
Diffuser endcap on the VERDICT 7.62 Ti suppressor

Jet-Turbine Diffuser Endcap™

Releases and disperses hot gas at the muzzle for faster cooling, further reducing flash and muzzle signature.
Wrench Flats

Integrated Wrench Flats

Built into the base of the body, so the silencer indexes and comes off with a standard wrench — no proprietary tooling.
Tripass Core Technology

Tripass Core Technology™

Three gas paths — a central bore and two helical bypass channels — feed three expansion / mixing chambers, where counter-clockwise blades disrupt and cool gases to significantly reduce sound signature, without inducing backpressure. LEARN MORE
HUB Compatible

HUB-Compatible

Runs the industry-standard HUB interface, so it fits mounts you may already own. Ships with a 5/8×24 direct-thread mount.
HUB Mounted Brake in 17-4 stainless steel

HUB Mounted Brake™

Our 5/8×24 direct-thread mount, machined from 17-4 stainless steel, with an integrated brake that cuts muzzle flash at the source. Hex drive for quick install and removal.

$650 MSRP

Everything Polite Society Ind Manufacturers

Recommended Firing Schedule

Published in the SAAMI Z299.6 format. A rating is a schedule, not an adjective — below are the cartridges, barrel lengths and firing cadences the VERDICT 7.62 Ti is built to run, and the round count at which it needs to cool.

CARTRIDGE MIN. BARREL MAX. CADENCE ROUNDS BEFORE COOLING
.223 Rem / 5.56 NATO 10.3 in. 30 rpm 150
.223 Rem / 5.56 NATO 10.3 in. Cyclic 30
.300 BLK subsonic 8 in. 60 rpm 60
.300 BLK subsonic 8 in. Cyclic 30
.300 BLK supersonic 8 in. 30 rpm 60
.300 BLK supersonic 8 in. Cyclic 30
.308 Win / 7.62 NATO 16 in. 15 rpm 60
.308 Win / 7.62 NATO 16 in. 30 rpm 30
.308 Win / 7.62 NATO 16 in. Cyclic 20
6.5 Creedmoor 20 in. 15 rpm 60
.300 Win Mag 22 in. 15 rpm 40

What “cool” means. A temperature, not a wait time. Point an infrared thermometer at the outside of the silencer, and when it reads 150 °F or less, go again. How long that takes depends on the day.

Shooting something we didn’t list? If it’s the same bore size or smaller than a cartridge in the table and it carries less energy, you can run it at that row’s numbers. That’s what puts the 7mm cartridges under the .300 Win Mag line. If nothing in the table covers it, you’re outside the schedule — give us a call and ask.

What if you go past it? Nothing in this table is a cliff. There’s no round count where the silencer stops being safe, and we’re not going to pretend there is. These are simply the numbers we’ll stand behind. Run well past them and break something, and that damage isn’t covered — and we work that out by looking at the silencer, not by asking you what you were doing with it.

The rest of it — the full schedule, how to cool it, what to look for — is in the owner’s manual. And if you want longer strings than these, that’s what the VERDICT 7.62 HD is for. Titanium buys you a lighter silencer; Inconel buys you a higher ceiling.

Always Wear Hearing Protection

While a silencer drastically reduces the sound of gunfire, it doesn't eliminate it — suppressed shots can still damage hearing. Please wear protection every time you shoot. We'd like you to still be enjoying this years from now.